Vacuum motor in filter housing

  #1  
Old 01-15-2008, 11:24 AM
ArdWrknTrk's Avatar
ArdWrknTrk
ArdWrknTrk is offline
pedant

Thread Starter
Join Date: Jan 2008
Location: EXTREME southwest CT
Posts: 23,576
Received 15 Likes on 15 Posts
Vacuum motor in filter housing

'87 F250 4V 460.
Is the vacuum motor in the scoop on the *drivers side* of this housing replaceable?
It lets engine compartment air into the housing @ WOT and should be closed @ cruise.
I've been chasing vacuum leaks, and this diaphram is shot.
The line is plugged for now but it FAILS open, so there's always cold air flowing and the heated air riser @ the snorkle is not as effective as it could be.
Looking at it I don't see a seperate p/n and am thinking there's no way to service it short of buying a new housing......Yeah, right...

Anyone on here know about these things? TIA any advice.

Jim
 
  #2  
Old 01-18-2008, 09:57 AM
Green Sales's Avatar
Green Sales
Green Sales is offline
Junior User
Join Date: Jan 2007
Posts: 79
Likes: 0
Received 0 Likes on 0 Posts
You may want to try the research department at Green Sales at 513-731-3304. Just provide them with all the information and they may be able to help you.
 
  #3  
Old 01-20-2008, 10:41 PM
Bern_F150_4x4's Avatar
Bern_F150_4x4
Bern_F150_4x4 is offline
Elder User
Join Date: Apr 2003
Location: Maryland
Posts: 673
Received 0 Likes on 0 Posts
My '86 has the same fresh air rig on the air-cleaner housing and yes, it's blown too.
 


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:42 AM.