You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Looking for a good used exhaust manifold that will fit a 63 Ford econoline 6 cyl. engine, 144 cu. in. Does not have to be econoline to work. PM me if you can help. Located in Eastern Iowa.
all parts for 429/460- performer intake i bought from someone on the 385 forum ,had a exhaust crossover welded up but worked good ,ran it for 8 months on my motor , 750 holley vs and some moroso stamped alumn valve covers , an old stock cast iron 4bbl intake and stock leaf springs from my 74 highboy,needs bushings but in great shape otherwise
__________________
so many chevies, so little time
Early Dodge Caravan for sale. October of '84 make, 2.2l dodge engine. Engine runs,tranny works, van drives, just doesn't stop. High miles, body shot. Email or PM for more details.
__________________
Jason Kendrick
'93 F350 Crewcab 5.8L
'70 F100 Custom 390/C6 (temporarily retired)
'93 Mercury Topaz 2.3L
'99 Ford Windstar SEL (bad transmission - For sale)
80-86 tailgate, condition doesn't really matter, need the latch and handle parts mostly, and some cables on the side, can be broken, just need the ends...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
hey guys. even though I dont live up here anymore, I've got a bud in Fort Madison in need of 300 6 intake and exhaust manifold, anybody got somthing close and cheap? thanks guys.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Well, does anyone happen to have a sapre distributor for a DS II 351M-400 or 460/ Somebody apparently felt they needed it more than I did, took it off my 77.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
I need the bracket that bolts to the clutch pedel as well as the rod that goes from that bracket through the floor to the clutch "arm" I need one asap Anyone got either or both of these pieces? If so call me at 1-319-266-3095 or email me at panheadjosh74@hotmail.com
hey guys. even though I dont live up here anymore, I've got a bud in Fort Madison in need of 300 6 intake and exhaust manifold, anybody got somthing close and cheap? thanks guys.
What year? EFI or carb? I used a 70's intake/carb and 87 exhaust - u get dual with the FI exhaust manifold, but you loose the heat exchanger. Any junk yard should have some good intakes for either and the FI exhaust manifold bolts up to new and old. Just a thought.
__________________
I'm nothing more than words on your monitor.
I need the bracket that bolts to the clutch pedel as well as the rod that goes from that bracket through the floor to the clutch "arm" I need one asap Anyone got either or both of these pieces? If so call me at 1-319-266-3095 or email me at panheadjosh74@hotmail.com
Thanks
Josh
Thanks for the offer on the spacer, but I fab'd one up already.
BTW how did he get e-mail and phone # to show???!! I haven't been around much for the summer, so did the forum rules change?
__________________
I'm nothing more than words on your monitor.
its for a 78 150. All the decent junkyards around fort madison closed up when scrap shot up, so he's been asking me down here so I thouht I'd ask around here before I went and pulled some and had to ship them up there.
Sam, I don't know as the rules changed, just the software and the restrictions it placed.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
