New wanted or sale thread
#32
I have a really clean 85 F-150. Excellent fenders, extended cab, tailgate,a good I6 300, new clutch, really nice T-18, Chrome rims from a 95 with center caps and good tires. 3.50 and a 2.47 rear, GOOD dash pad, a bed load of extra parts... axles, interior, etc.
Will sell whole or parts.
Will sell whole or parts.
#34
10 sheets of 52"x93" 18ga sheetmetal. $50/sheet. All or part. Free delivery within 50mi of Wayland,IA. Otherwise $0.25/loaded mile beyond that.
Last edited by stryder; 12-16-2006 at 09:05 PM.
#35
trying to get rid of inline 6 parts, out of 82 f100, motor has 220,000 miles and a spun rod bearing. if you need manifolds, dizzy, or anything they'll be cheap enough.
have c4 tranny, and 9 inch rear [3.50 open diff] out of same truck, both are in decent shape.
or i could let the whole truck go for a hundred bucks, has title, runs and stops.
were also parting a 75 chevy custom delux 3/4 ton and a 75 chevy scottsdale 10, cheap, also have various nova parts from 68-74.
have c4 tranny, and 9 inch rear [3.50 open diff] out of same truck, both are in decent shape.
or i could let the whole truck go for a hundred bucks, has title, runs and stops.
were also parting a 75 chevy custom delux 3/4 ton and a 75 chevy scottsdale 10, cheap, also have various nova parts from 68-74.
#36
Parting out 1978 F150 4x4 Ranger XLT P/U. 11k miles on new 400 engine, good C6 and transfer case. Will sell individual parts or whole truck. Call for part availability 515-708-2162.
#39
1977 Ford F150 $500
This truck runs and drives good, but needs tuned up since it has sat for several years. Hardly any rust, floorboards and one cab corner. I dont know a whole lot about these trucks but from what i have seen, its uncommon to find them this clean around here. Interior is nice too, there isnt even a crack on the dashpad. Its a 351 auto with a/c.
I dont have the title, the guy I bought it from is supposed to be getting it (but its been a year now, so dont count on it). I know its worth at least my asking price in parts alone. I hate to part it out, but if it comes to that I will. I dont check forums often so email me direct and I will get you any info you need. Im in Bouton, IA 50039 $500 cash takes it.
charger1973@hotmail.com
Additional pics are here: http://s46.photobucket.com/albums/f1...20Ford%20F150/
I dont have the title, the guy I bought it from is supposed to be getting it (but its been a year now, so dont count on it). I know its worth at least my asking price in parts alone. I hate to part it out, but if it comes to that I will. I dont check forums often so email me direct and I will get you any info you need. Im in Bouton, IA 50039 $500 cash takes it.
charger1973@hotmail.com
Additional pics are here: http://s46.photobucket.com/albums/f1...20Ford%20F150/
#40
Originally Posted by Charger1973
This truck runs and drives good, but needs tuned up since it has sat for several years. Hardly any rust, floorboards and one cab corner. I dont know a whole lot about these trucks but from what i have seen, its uncommon to find them this clean around here. Interior is nice too, there isnt even a crack on the dashpad. Its a 351 auto with a/c.
I dont have the title, the guy I bought it from is supposed to be getting it (but its been a year now, so dont count on it). I know its worth at least my asking price in parts alone. I hate to part it out, but if it comes to that I will. I dont check forums often so email me direct and I will get you any info you need. Im in Bouton, IA 50039 $500 cash takes it.
charger1973@hotmail.com
Additional pics are here: http://s46.photobucket.com/albums/f1...20Ford%20F150/
I dont have the title, the guy I bought it from is supposed to be getting it (but its been a year now, so dont count on it). I know its worth at least my asking price in parts alone. I hate to part it out, but if it comes to that I will. I dont check forums often so email me direct and I will get you any info you need. Im in Bouton, IA 50039 $500 cash takes it.
charger1973@hotmail.com
Additional pics are here: http://s46.photobucket.com/albums/f1...20Ford%20F150/
#41
my 93 explorer
i have a 93 eddie bauer edition explorer. i am looking to get rid of it and am wondering how much i can sell it for..It is only good for a parts vehicle as it needs a new engine. I have a guy who is suppos to be getting me an engine but that was almost 3 months..so i am looking to get rid of it without the engine....
It is an eddie bauer and I am pretty sure it has every extra available option except a sunroof. the front seats are torn up but everything else is in good shape.
It is an eddie bauer and I am pretty sure it has every extra available option except a sunroof. the front seats are torn up but everything else is in good shape.
#42
Now available with paperwork, 89 F250 351W 5 speed 4x4, two tone red, more like a dark maroon and dark red, topper, bed liner. Standard cab. It was my cousin's truck, now selling it topay back money.... Not too bad of a truck, main seals leak is the main problem with it, some rust on the box. Asking $2000.
#43
Parting out my 1969 F100
Some parts listed on Ebay.
390 and C6
http://cgi.ebay.com/ebaymotors/ws/eB...9942&rd=1&rd=1
Aluminum grill from 1967 F100
http://cgi.ebay.com/ebaymotors/ws/eB...5035&rd=1&rd=1
Be sure to view my other auctions going on right now!
FYI - I am parting out the WHOLE TRUCK. In the very near future I will be posting other parts such as the door shells, door hardware, radiator, core support, A set of 5 chrome 15" half moon wheels with great tires ( 75% tread or more - spare is new) ac components, hood (2), outer fenders, inner fenders, hood hinges, interior components, cab, box, tailgate, rear axle, power steering components, power brake components, many new brake parts ...it has all GOTTA GO. All steel components are rust free and are in good to excellent condition. Some have been stripped, primed, painted...etc. There aren't many of these around that are really rust free. Heck even the frame is ultra clean. If there is somthing you are looking for, shoot me a message and I'll get it listed . I am trying to hold off on the suspension components for now. I would like to get the cab and box off the frame before I start yanking the wheels and axles.
390 and C6
http://cgi.ebay.com/ebaymotors/ws/eB...9942&rd=1&rd=1
Aluminum grill from 1967 F100
http://cgi.ebay.com/ebaymotors/ws/eB...5035&rd=1&rd=1
Be sure to view my other auctions going on right now!
FYI - I am parting out the WHOLE TRUCK. In the very near future I will be posting other parts such as the door shells, door hardware, radiator, core support, A set of 5 chrome 15" half moon wheels with great tires ( 75% tread or more - spare is new) ac components, hood (2), outer fenders, inner fenders, hood hinges, interior components, cab, box, tailgate, rear axle, power steering components, power brake components, many new brake parts ...it has all GOTTA GO. All steel components are rust free and are in good to excellent condition. Some have been stripped, primed, painted...etc. There aren't many of these around that are really rust free. Heck even the frame is ultra clean. If there is somthing you are looking for, shoot me a message and I'll get it listed . I am trying to hold off on the suspension components for now. I would like to get the cab and box off the frame before I start yanking the wheels and axles.
#44
WANTED: I need the HVAC control panel (the part with the levers on it) for a 1978 truck. It has to have the setting for A/C and the switch for the dual fuel tanks. Please PM me if you have one that is in good to excellent condition.