in a bind, need clutch slave cylinder bracket
#1
in a bind, need clutch slave cylinder bracket
I know that this should probably be in the for sale and wanted thread, but I'm REALLY in a bind.
I'm the guy with the 85 F-150 that was stolen about a week ago. It was recovered wrapped around a tree, so I'm in the midst of putting that truck's driveline into another body that I bought.
I need one piece to get it all put together and that is the clutch slave cylinder bracket for a 1983 and up truck with a 4 speed manual and a small block (300, 302, 351). It may be the same for other motors, but i really don't know. I'm having one heck of a time tracking one down and was wondering if anyone had one they would be willing to sell me.
I'm in Rolla, so the closer the better.
Thanks!
Justin
I'm the guy with the 85 F-150 that was stolen about a week ago. It was recovered wrapped around a tree, so I'm in the midst of putting that truck's driveline into another body that I bought.
I need one piece to get it all put together and that is the clutch slave cylinder bracket for a 1983 and up truck with a 4 speed manual and a small block (300, 302, 351). It may be the same for other motors, but i really don't know. I'm having one heck of a time tracking one down and was wondering if anyone had one they would be willing to sell me.
I'm in Rolla, so the closer the better.
Thanks!
Justin
#5
#7
1984/96 Slave Cylinder Mounting Bracket
E4TZ7A544A .. Clutch Slave Cylinder Mounting Bracket-Bellhousing / Obsolete
While some dealers still have this part, Ford does not.
Using the in-house Ford Dealer Parts Locator System, I looked at Ford's PDC status (Parts Distribution Centers), none are available.
Fits: 1984/96 F150 / 1984/97 F250/350, F(Super Duty / 1980/89 Econoline.
The last MSRP was $76.50.
BOB ALLEN FORD in Overland Park KS has FOUR: 800-676-0675.
HUMES FORD in Corry PA has ONE.
CRAIN FORD in Warren IN has TWO.
PERRY FORD in Santa Barbara CA has ONE: 800-682-2411.
GENTRY FORD in Ontario OR has ONE: 541-889-7207.
NOS PARTS SOURCE in Lenexa KS has ONE: 913-220-5746.
SUNRISE FORD in North Hollywood CA has ONE: 818-980-9800.
RIDENOUR AUTO GROUP in New Lexington OH has ONE.
RUSTY ECK FORD in Wichita KS has ONE.
ALLEN VIGEL FORD in Morrow GA has ONE: 866-409-9537.
LAKE POWELL FORD in Page AZ has ONE.
VINTAGE FORD PARTS in Beaver Falls WI has 369 (!), but does not sell parts to the general public.
You'll have to have your local Ford or L/M Dealer order from them.
Sorry, some of these dealers do have their phone numbers listed on the parts locator.
While some dealers still have this part, Ford does not.
Using the in-house Ford Dealer Parts Locator System, I looked at Ford's PDC status (Parts Distribution Centers), none are available.
Fits: 1984/96 F150 / 1984/97 F250/350, F(Super Duty / 1980/89 Econoline.
The last MSRP was $76.50.
BOB ALLEN FORD in Overland Park KS has FOUR: 800-676-0675.
HUMES FORD in Corry PA has ONE.
CRAIN FORD in Warren IN has TWO.
PERRY FORD in Santa Barbara CA has ONE: 800-682-2411.
GENTRY FORD in Ontario OR has ONE: 541-889-7207.
NOS PARTS SOURCE in Lenexa KS has ONE: 913-220-5746.
SUNRISE FORD in North Hollywood CA has ONE: 818-980-9800.
RIDENOUR AUTO GROUP in New Lexington OH has ONE.
RUSTY ECK FORD in Wichita KS has ONE.
ALLEN VIGEL FORD in Morrow GA has ONE: 866-409-9537.
LAKE POWELL FORD in Page AZ has ONE.
VINTAGE FORD PARTS in Beaver Falls WI has 369 (!), but does not sell parts to the general public.
You'll have to have your local Ford or L/M Dealer order from them.
Sorry, some of these dealers do have their phone numbers listed on the parts locator.
Trending Topics
#11
#12
Slave Cylinder Bracket for a 58 F100
I have put a 289 Ford sm block into my 58 F100 but now I discover that bell housing is with out a bracket for the slave cylinder.
I’m in a bind. The bell housing does not have one and I need to know if one can be made and the measurements it takes. or can I buy one and “attach” it to the bell housing? But I would need to know measurements to make sure the distance is right and angle? Rather not drop the engine and look for a bell housing that might have a bracket on it. Help me Obi Wan Kenobi Your my only hope. . Sorry - Star Wars joke.
My first Ford project - Former wife had a thing about trucks - she hated them and eventually me. So my experience is mostly with old 36hp VW Busses and Karman Ghias. So I need a little hand up on this one.
Thank you in advance.
David
SLC UT
I’m in a bind. The bell housing does not have one and I need to know if one can be made and the measurements it takes. or can I buy one and “attach” it to the bell housing? But I would need to know measurements to make sure the distance is right and angle? Rather not drop the engine and look for a bell housing that might have a bracket on it. Help me Obi Wan Kenobi Your my only hope. . Sorry - Star Wars joke.
My first Ford project - Former wife had a thing about trucks - she hated them and eventually me. So my experience is mostly with old 36hp VW Busses and Karman Ghias. So I need a little hand up on this one.
Thank you in advance.
David
SLC UT
Originally Posted by NumberDummy;[url=tel:7543623
7543623[/url]]E4TZ7A544A .. Clutch Slave Cylinder Mounting Bracket-Bellhousing / Obsolete
While some dealers still have this part, Ford does not.
Using the in-house Ford Dealer Parts Locator System, I looked at Ford's PDC status (Parts Distribution Centers), none are available.
Fits: 1984/96 F150 / 1984/97 F250/350, F(Super Duty / 1980/89 Econoline.
The last MSRP was $76.50.
BOB ALLEN FORD in Overland Park KS has FOUR: 800-676-0675.
HUMES FORD in Corry PA has ONE.
CRAIN FORD in Warren IN has TWO.
PERRY FORD in Santa Barbara CA has ONE: 800-682-2411.
GENTRY FORD in Ontario OR has ONE: 541-889-7207.
NOS PARTS SOURCE in Lenexa KS has ONE: 913-220-5746.
SUNRISE FORD in North Hollywood CA has ONE: 818-980-9800.
RIDENOUR AUTO GROUP in New Lexington OH has ONE.
RUSTY ECK FORD in Wichita KS has ONE.
ALLEN VIGEL FORD in Morrow GA has ONE: 866-409-9537.
LAKE POWELL FORD in Page AZ has ONE.
VINTAGE FORD PARTS in Beaver Falls WI has 369 (!), but does not sell parts to the general public.
You'll have to have your local Ford or L/M Dealer order from them.
Sorry, some of these dealers do have their phone numbers listed on the parts locator.
While some dealers still have this part, Ford does not.
Using the in-house Ford Dealer Parts Locator System, I looked at Ford's PDC status (Parts Distribution Centers), none are available.
Fits: 1984/96 F150 / 1984/97 F250/350, F(Super Duty / 1980/89 Econoline.
The last MSRP was $76.50.
BOB ALLEN FORD in Overland Park KS has FOUR: 800-676-0675.
HUMES FORD in Corry PA has ONE.
CRAIN FORD in Warren IN has TWO.
PERRY FORD in Santa Barbara CA has ONE: 800-682-2411.
GENTRY FORD in Ontario OR has ONE: 541-889-7207.
NOS PARTS SOURCE in Lenexa KS has ONE: 913-220-5746.
SUNRISE FORD in North Hollywood CA has ONE: 818-980-9800.
RIDENOUR AUTO GROUP in New Lexington OH has ONE.
RUSTY ECK FORD in Wichita KS has ONE.
ALLEN VIGEL FORD in Morrow GA has ONE: 866-409-9537.
LAKE POWELL FORD in Page AZ has ONE.
VINTAGE FORD PARTS in Beaver Falls WI has 369 (!), but does not sell parts to the general public.
You'll have to have your local Ford or L/M Dealer order from them.
Sorry, some of these dealers do have their phone numbers listed on the parts locator.
Thread
Thread Starter
Forum
Replies
Last Post
Jacksf150
New Member Introductions
0
05-04-2017 07:17 PM
phantomjt3
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
10
06-26-2016 09:44 AM
|WYG|SS
1987 - 1996 F150 & Larger F-Series Trucks
10
11-16-2015 06:54 PM
Shark Racer
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
52
08-17-2010 08:35 PM
Nightrain
1983 - 2012 Ranger & B-Series
0
07-01-2009 03:42 AM
1986, 84, automotive, bracket, centers, clutch, cylinder, distribution, e4tz7a544a, f150, ford, numbers, parts, phone, slave