Front end work, need some tips!
#1
Front end work, need some tips!
Hey fellas -
I'm going to be workin on my friends 96 explorer sport. I'm replacing ball joints Upper and lower both sides, the rack and pinion (not sure about this) and also the Powersteering pump. I got the PS pump and ball joints down, I'm mostly worried about the rack and pinion as I have not worked on them before. So any tips would be very helpful!! Thanks guys!
Brian
I'm going to be workin on my friends 96 explorer sport. I'm replacing ball joints Upper and lower both sides, the rack and pinion (not sure about this) and also the Powersteering pump. I got the PS pump and ball joints down, I'm mostly worried about the rack and pinion as I have not worked on them before. So any tips would be very helpful!! Thanks guys!
Brian
Thread
Thread Starter
Forum
Replies
Last Post
rcuevas55
1967 - 1972 F-100 & Larger F-Series Trucks
7
09-10-2016 02:45 PM
jimbobtaylor
Explorer, Sport Trac, Mountaineer & Aviator
5
09-10-2004 12:52 PM
Comer14
1961 - 1966 F-100 & Larger F-Series Trucks
2
03-06-2003 07:40 PM