64 Custom Cab Chrome Trim

[gritsngumbo]

Anyone have a source for exterior CC chrome pieces for a 64 F100? I am missing the cowl pieces for both sides and would like to replace the door moldings as someone has put screws through them. Apparently this model is sort of an ophan and none of the suppliers seem to offer the chrome moldings. Thanks in advance.

[gangstakr]

It's seems to me your going huntin! trying to find those pieces is difficult. Seems even in the boneyards those cowl pieces are missing. If I find any out here I'll let you know. Yes the 64 is the stepchild that know one wants or has parts for so you have to search HI & LO and when you find a 64 to strip strip it completely. I opted not having side moldings and no emblems the only parts on my truck that says custom cab are the exterior door handle scratch plates. Look at my gallery for a clean 64 long bed custom cab. What purpose do the moldings serve other than originality?

[NumberDummy]

Originally Posted by gritsngumbo

Anyone have a source for exterior CC chrome pieces for a 64 F100? I am missing the cowl pieces for both sides and would like to replace the door moldings as someone has put screws through them. Apparently this model is sort of an ophan and none of the suppliers seem to offer the chrome moldings. Thanks in advance.

C3TZ-8102328-A .. Cowl Molding - Fits: 1963 & 1964 ~ Right/Left is the same.

C3TZ-8120939-A .. Left Door Side Molding - Fits: 1963 & 1964

Don't be discouraged, these molding are hard to find. Ebay is prolly the best source. It took me two years to find all the NOS moldings for my 1965, and this search took place in 1982/83. Some ppl want their trucks to be all original. Part of the fun in owning these old piles, is the hunt for all the goodies.

[no1lowr]

lmctruck.com

[NumberDummy]

Originally Posted by no1lowr

lmctruck.com

If you look at the top of the page you will see the FTE sponsors that pay to support this very forum: Blue Oval Truck Parts, Mac's and Auto-Krafters, for example.

Without sponsors there would be NO FTE.

lmc is NOT an FTE sponsor.

[gritsngumbo]

Thanks NumberDummy: I missed out on a complete set on e-bay last month do to my inattention. Will keep looking. As a former publisher I am certainly an advocate for supporting advertisers...I always look there first...but as we agreed the 64 is a bit of an orphan and many suppliers just skip over that model.

[cobraguy]

I'm looking at a 64 f250 parts truck tomorrow. I'll see if it has any.

[camperspecial65]

are the door mlds same L and R ??? I saw a 63 that had some of the mldgs....saw one at same yd last yr...63 with the 4X4 type box....Im still kicking myself for not getting them...

- cs65

I do have a pr

[gritsngumbo]

Yes, the L and R Door Moldings are the same.

[ddavidv]

Originally Posted by no1lowr

lmctruck.com

Except they don't have them either.