2008 Escape Remote Start & Alarm
#1
07-31-2007, 02:45 PM
Join Date: Jul 2007
Location: MA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
2008 Escape Remote Start & Alarm
I was wondering if anyone knows the Alarm, Remote Start, and Window Module Wiring for a 2008 Ford Escape. Also if you have done one of these vehicles any tips to make the installation go as easy as possible would be appreciated.
The complete system will consist of the Python 990 Alarm & Remote Start (5301P), 556SW Ford Bypass Module, (2) 530T Window Modules, 50
Radar Sensor, & 506T Glass Audio Sensor.
Thanks,
Dan McNeill
This is what I have so far:
12v + blue/red
ign + white/orange
acc + violet/green
keysense + blue/gray
starter + blue/white
horn - brown
brake + gray/brown (dkp)
use domelight for doorpin + gray/violet (dkp)
lock - blue/green (dkp)
unlock - yellow/violet (dkp)
parking light - blue/gray (switch)
must isolate the white/violet with relay
if it has autolamps then also isolate violet/green
The complete system will consist of the Python 990 Alarm & Remote Start (5301P), 556SW Ford Bypass Module, (2) 530T Window Modules, 50
Radar Sensor, & 506T Glass Audio Sensor.Thanks,
Dan McNeill
This is what I have so far:
12v + blue/red
ign + white/orange
acc + violet/green
keysense + blue/gray
starter + blue/white
horn - brown
brake + gray/brown (dkp)
use domelight for doorpin + gray/violet (dkp)
lock - blue/green (dkp)
unlock - yellow/violet (dkp)
parking light - blue/gray (switch)
must isolate the white/violet with relay
if it has autolamps then also isolate violet/green
Thread
Thread Starter
Forum
Replies
Last Post
resq302
Explorer, Sport Trac, Mountaineer & Aviator
0
03-04-2012 07:32 PM
JohnHarris
2009 - 2014 F150
12
03-30-2011 06:08 PM
weekendwarriorfsw32
1999 - 2003 7.3L Power Stroke Diesel
16
04-20-2010 11:15 PM
