Quality Engine Shop?

jeffisjacked · #1 (**permalink**) 07-03-2007, 05:48 AM

Does anyone know where there is a good engine shop that is experienced in the modular motors around??

glruff · #2 (**permalink**) 07-03-2007, 10:46 AM

What you got in mind? Phil, phil6608, Dan, danlee, or Brian, bd4martin may be able to assist with this request.

jeffisjacked · #3 (**permalink**) 07-03-2007, 10:59 AM

port/assemble the heads, install new cams on a dohc, and reassemble top end of the motor

ridgerider3 · #4 (**permalink**) 07-03-2007, 05:12 PM

Not 100% sure, but Rose engine service here in dover works with "stock" new cars, plus a lot of Hot Rod stuff.

Rose Engine Service
2860 N Dupont Hwy
Dover, DE
(302) 736-0733

phil6608 · #5 (**permalink**) 07-05-2007, 10:53 AM

Quote:

Originally Posted by jeffisjacked

Does anyone know where there is a good engine shop that is experienced in the modular motors around??

well theres only one place I would ever go for something like that or to have any mod motor work done!
My engine builder. + anything I need done to my truck.
Matt @ Performance Evolutions
Middletown DE 449-3200 Tell him Phil sent you.
www.performance-evolution.com

He has done all the work on my truck.From building the motor/tuning the computer/and even installing my 4.10 gears!
Great guy and very reasonable pricing.

jeffisjacked · #6 (**permalink**) 07-05-2007, 11:43 AM

thanks...does he have a fox body mustang with a 4v mod motor in it?

jeffisjacked · #7 (**permalink**) 07-05-2007, 11:58 AM

and now that i went to the website i answered my own question...lol....i still have that issue of MM&FF lying around.

glruff · #8 (**permalink**) 07-05-2007, 12:04 PM

^^^^^Talkin to yourself,

AGAIN?

jeffisjacked · #9 (**permalink**) 07-05-2007, 01:24 PM

yea..medicine is too expensive these days

danlee · #10 (**permalink**) 07-10-2007, 06:33 AM

I have had some work done at Rose Engine Service in Dover. The work was good, but they are not a 'Ford' specialist shop. My 434 motor was built in Minnesota.

Tractor Boy · #11 (**permalink**) 07-11-2007, 04:51 PM

Tractor Boy Motorsports in Arnold, MD can do it, they do high quality, inexpensive work

jeffisjacked · #12 (**permalink**) 07-11-2007, 11:02 PM

awesome, thanks a lot

phil6608 · #13 (**permalink**) 07-12-2007, 03:49 AM

I forgot to mention that my guy(Matt) only works on FORD.
He has like 5 or 6 Mustangs in hes shop all the time,,,lol
He built a lightning for a guy with 16 PSI and a 100 shot it made 793 RWHP!!!!

jeffisjacked · #14 (**permalink**) 07-12-2007, 05:33 AM

yea, i talked to him yesterday...apparently he's really good friends with my buddy, but he outsources all his machine work...