weekend progress
#1
weekend progress
I added 3 pix to my "building console and lower dash assembly" album that shows this weekend's progress. We finished the lower dash extension ready for paint.
Made a recess for the E brake release handle, a boxout for two AC vents above the console. Added two more flush vents near the ends, mounted headlight, ignition, wiper switch on driver's side, two 12V power outlets on pass side. There will be 4 outlets total (2 more in center console), with all the electronic gadgets needing an outlet these days you can never have too many IMHO.
Made a recess for the E brake release handle, a boxout for two AC vents above the console. Added two more flush vents near the ends, mounted headlight, ignition, wiper switch on driver's side, two 12V power outlets on pass side. There will be 4 outlets total (2 more in center console), with all the electronic gadgets needing an outlet these days you can never have too many IMHO.
#3
#6
Originally Posted by ksmith203
Looks great Chuck, I am jealous of your fab skills! Probably have to come down again and take some more lessons!
Nothing I've done is that difficult a project. I had the lower dash panel bent at a fab shop out of 18ga.
#7
Trending Topics
#8
#10
Yes, we have a 10 day racing road trip planned for the end of July to fingerlakes area of NY for a race then to Buffalo to visit with Family and finish at a race in Toledo OH the following weekend. I really want to tow the trailer up there for that.
I needed to get the dashboard and console area together so I can wire everything.
I needed to get the dashboard and console area together so I can wire everything.
Last edited by AXracer; 06-12-2007 at 12:56 PM.
#11
#14
What events are you running?
Originally Posted by AXracer
Yes, we have a 10 day racing road trip planned for the end of July to fingerlakes area of NY for a race then to Buffalo to visit with Family and finish at a race in Toledo OH the following weekend. I really want to tow the trailer up there for that.
I needed to get the dashboard and console area together so I can wire everything.
I needed to get the dashboard and console area together so I can wire everything.
What events are you running in WNY? I am a fellow autocrosser, just don't have anything to drive at the moment. If I'm in the area I might swing by to check out your tow vehicle setup!