computer code location

vcmadsen · #1 (**permalink**) 08-25-2002, 10:06 PM

I am having problems locating the computer code for my 96 Ford Bronco. I have checked the interior driver side of the truck, is this correct location? Or do I have to remove paneling to get to the computer?

I apologize for taking up your time with this simple question, but I simply can't find the code.

Any help would be welcome.

Thanks!

FTE Ken · #2 (**permalink**) 08-26-2002, 08:49 AM

1. Sticker on the wiring harness, low down on the driver's side under the hood.

2. On the drivers side, under dash area, behind the kick panel. Look for a small silver box about 1 1/2 inches thick, 8 inches wide and about 10 inches long. The code will be on it or on the wiring harness going into it.

vcmadsen · #3 (**permalink**) 08-26-2002, 06:46 PM

Thanks, the code is TIN3 and I ordered today.

I appreciate the quick response, I'll let you know how the chip works.

FTE Ken · #4 (**permalink**) 08-26-2002, 07:15 PM

Thanks and I'm quite confident you'll be happy with it.

admorbital · #5 (**permalink**) 09-12-2002, 01:10 PM

I installed the chip last night and it is working great. I was a little worried about damaging the contacts at first, so the chip didn't work initially. I got it right the second time though, thanks for your help.

FTE Ken · #6 (**permalink**) 09-12-2002, 01:11 PM

Glad to hear you got it going...

FTE Ken · #7 (**permalink**) 09-13-2002, 03:45 PM

cowboy_up_4_8 · #8 (**permalink**) 04-17-2008, 01:07 AM

i'm trying to figure mine out on my truck also. i have a 95 f-350 pstroke. it has a 96 motor in it. i looked on my box and on the harness. i have two number and not sure which one is the one. i have F5TB and F5TF. i you could, tell me which one or if they are even the right ones. thanks a million, Justin