You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Welcome! There are two ways you can do it, there is a link under the Iowa chapter name when you click Midwest Region, rather than direct into the Iowa Chapter, or go to your user CP, click Chapter memberships, then click the Iowa Chapter, and do the join request, and I will accept it as soon as I see it.
So whereabouts are you located? I still get down to Keokuk once in a while, but am now up here west of Iowa City now.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
i am just south of ottumwa about 20 miles or so, i am in the proccess of relocating more towards keosaqua, but just waiting to finish paperwork!! In milton iowa is where i will finally be residing!!
Out to wide open spaces, huh? I used to live just across the border in Missouri, near Luray, east of Memphis.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
ok thanks, ya, where i am moving is just north of memphis, quite little town, but if you've lived down this way you probably already know that, and also if any one looks at this post i am lookin for a 79 f-150 or 250 with a 351m or 400, and a manual tranny any condidtion, within 250 miles or so lil farther won't hurt either, thanks all who have helped me!! Brad
Yep, I know where Wayland is. Been past there many times. Even going past there yet today...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
I have to run on down to Keokuk, happen to be running a load of scrap over to Hamilton today, then swing back to Luray, Mo to pick up a van I have there. I live near Marengo, west of Iowa City. I get through every couple weeks to pick up the step daughter. I used to live just across the border for a few years, but moved back up here last December.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
