When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
No pics, but had the passanger side and the drivers side matched to the rear factory tint of the SCREW doors and rear sliding window. All 5 windows now match perfectly.
I will post a pic later when I am on my laptop but I have 35% on the front and then I did another layer Of 20% on top of the factory tint on the back windows and it looks good.
Don't have any pics...just imagine a truck with black windows from the outside. I had my car done with "Charcool" 20% a couple of years ago and love it. That place closed down, so I went to a place that uses "Llumar" film for the truck - also 20%. It looks OK from the outside, but inside looking out, this Llumar film has a blue tint while the factory has a bronze hue. I think the Charcool brand tint would have been a perfect match.
Alright here you go. They arent the best but. It is 35% on the front two windows with a 5% strip and the back windows and back glass have a sheet of 20% over top the factory tint. I have 5% all around on my 93 F-150 which is nice but this setup on the new truck is nice for a everday and every night driver.
I have 35% on my front windows and the backs are just factory privacy glass.
I wish my fronts were a bit darker but the legal limit here is 35% and I didn't want to deal with the popo's hassling me or giving me any tickets.