When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok so I'm gonna build up a 6.9L and put it in a 1980 F-350, now the question i have is there anyone out there that can help me with the motor mounts, I know they will need some fabrication to get the motor to bold to the frame so is there anyone who can help me out with some diagrams or tell me what to do to make some from there own personal experience, thanks Mike.
You 80 frame should be like an 83 up through a 97. The plates that bolt to the frame that have the slots for the mounts that are on your engine should be easy to get. If you can't find any locally let me know. I have a couple of frames laying around so I can hook you up with that.