I have two codes that my Edge has picked up. I know what they are now am I stuck taking to it the dealership....minus the Edge? Here are the two codes.

1.) P0138 (H02S12) Circuit high voltage
2.) P2271 Sensor Signal Stuck Rich Bank 1 Sensor 2.

 

Well it's a rich code....either it thinks the engine is running rich, or it actually is running rich. check for high fuel pressure, bad MAF readings or possibly bad O2 sensor. Stuck injector could be the issue too.... Or a leaking fuel pressure regulator.

 

Holy smokes, how do I check all that stuff...haha How do I check for bad MAF reading or a bad 02 sensor? I unplugged something that plugs into the right side of the intake up on top, not sure what thaty was but it didn't appear to be any problems with it. Not sure if that was the O2 or the MAF? What about the stuck injector how do I check that?

 

Well looks like I might be calling Edge tomorrow because when I return it to stock, I don't get the warning light on my dash.

 

Hey Brian please keep us informed if you call edge. Seems mine pulled 3 codes the other day one was a p-2106 a p-0320 and the other I know was false. I immediately called my friend at dealer and he said something like I would have to bring it in this Monday so I programmed it back to stock and it pulls nothing so now I'm stuck also..

 

Yeah I was just thinking how mine's been trouble free for the year I've had it and now this came up. I'm hoping it's as simple as just downloading the latest version of the software from Edge. If I don't get any good answers on here I'm gonna call them either tomorrow or Tues. at the latest. I'll let ya know what I find out.

 

Brian. I even sent my programmer back to edge about 2 months ago after having my truck in shop and when I got it back they said they bench tested it and put newest software in it and said it passed so I don't know..

Mike.

 

Hi to all! New to site. I was reading your posts and have had issues w/ my '06 F150 4x4 S-Cab. All my problems began Thurs. 3-15-07. I had my Edge set on "Level 2" w/ the only customization for larger tires. Upon acceleration from stopped, it felt as if it wanted to stall, but only in first gear. I reprogrammed it back to stock and now I have a vibration throughout the entire truck, most severe in the steering wheel. I've had the Edge for about a month w/out problems. I took the truck to the dealership today and yes, I left it programmed in "Stock".

 

Well I returned mine to stock and drove it all yesterday with no warning lights and on my way to work this morning the light came on. So I made a appointment to have my dealership take a look at it next Monday.

 

Does anyone have any suggestions on what to set the Edge Evo at? I know everyone says it is "to your liking", but I was still just wondering. I previously had mine set to "Level 2" until my above troubles began.