Chapter Buy/Sell/Trade Ads: Each chapter will have one (1) thread for chapter members to list items wanted, for sale or for trade. The rules for posting in this thread are as follows:
Only Ford truck related items and automotive tools & equipment can be listed.
Only one picture is allowed per post, per item. If additonal pictures are necessary, place a link in your post to those pictures. Additional posted pictures will be removed without warning.
You must have your private messaging (PM) turned on and be able to receive PM's to post an ad in the Chapter thread. If you do not, your post will be removed.
Use the PM or email system to conduct all discussion and transactions regarding the item(s). You can post your interest in the item(s) and that you’ll contact the seller but no discussions. Keep it short.
If you post an ad, please reply that you found, sold or otherwise disposed of the item.
The buy/sell/trade thread will be purged periodically for old postings. Generally every 30 to 60 days.
You need to be an active Chapter Member on FTE to post a wanted, for sale or for trade item(s). No Exceptions.
You must have permission from the Chapter Leader or a Regional Moderator to post an ad in a chapter that you are not a member of.
If you are new to FTE (less than 15 days) or have less than 25 posts, you must contact the Chapter Leader for permission before posting an ad.
Your ad or reply to any ad is subject to editing or deletion at discretion of the Chapter Leader, Moderators or Administrators of FTE.
Commercial advertisements are strictly prohibited.
Looking for '42 to '47 truck parts. I just bought 2 more 1/2 tons in Hines and they were missing quite a few parts including drivers doors on both cabs. Would consider a complete truck if it's within a 150-200 mile radius of Christmas Valley. Wife gave me a choice of either get rid of the old trucks or she was leaving, went out and bought two more! Now I can afford more parts!
Anyone have a useable driver's door striker plate for a 1953 F-350? I just need something to keep the door closed here on the farm. The truck is a flatbed with a welder/generator and an air compressor to maintain equipment. Never goes on the road. I'm getting tired of holding the door shut while steering and shifting.
I see they make new ones, but would prefer a ugly hand-me-down from someone that gets shiny new ones!
I need to start liquidating some of my "treasures". Anybody that needs 65-66, and 67-72 pickup parts shoot me a PM. I have extra beds, cabs, chassis's etc, etc. Literally TONS of this stuff.
__________________
Don.
Oregon Chapter Leader: To join the Oregon Chapter, click HERE
Don, if that '47 is still cluttering up your place I can bring up my car carrier and still have room for 2 swb trucks on the deck or any parts (up to 12,000 lbs. plus a '47) that need to be delivered between Condon and Christmas Valley was that suttle enough?
Co-worker just picked up a 1960 F-250 Custom Cab, with big back window. It has a six cylinder and 4 speed. The person he got it from did a hack job 4x4 conversion, by cutting the box shorter, and lopping off the end of the frame (yuck). No transfer case or front drive shaft. A lot of tlc needed. He wasn't sure what he wanted to do, but he didn't want to pass it up. So, I'm listing it for him. $1000 o.b.o. Pictures will come soon, if anyone wants them. I did manage to jump the coil, and get it started, and it actually runs quite well. Will try and tinker with it through out the week so that it will move under its own power. It has a clear Oregon title.
anyone got a 69 to 73 f-250 4x4 with a 390 and 4speed trany im looking for one to restore
__________________
Iron sharpens iron; so a man sharpens the countenance of his friend. Proverbs 27:17
1988 Bronco II 4x4 chopped top & soft top 4in lift
1971 f100 4x4 390 4speed solid truck RESTO project
Oregon Chapter Member: To join the Oregon Chapter, click HERE
still looking for a good 428 fe.
might settle for a strong 390, if it has mods thats better.
also need hp d44 4.10, and a np205 t case and shift linkages.
also have 1971 f250 2 wheel drive chassis if anybody is interested.
__________________
1971 ford F250 highboy. big lifted son of a gun!
1964 Buick Riviera. 425 c.i. sleeper
WHEELINN FOR LIFE!!!
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
I can bring up my car carrier and still have room for 2 swb trucks on the deck or any parts (up to 12,000 lbs. plus a '47
) that need to be delivered between Condon and Christmas Valley
