Stumped and frustrated
#1
Stumped and frustrated
Hey guys have a 1995 351W in my f250. I’ve had it for about 2 years now and finally got it back to running order but as I live 2 hours from the truck and my dad being off when I work things have been messed up. My dad decided to do an EGR and smog delete without really looking into it. So now I am trying to figure out what goes where and what vacuum components are needed.
If anyone could show me a video or picture of the vacuum lines or just walk me through it I would greatly appreciate it! I can’t read the schematics I’ve found for anything.
I am getting around 17-18 on the vacuum coming off the intake manifold. The switch for HVAC dash/vent is working. I am not throwing any codes. I have the EGR hooked up to the sensor but not to the heads due to a cutting job and no longer have a vac can.
If anyone could show me a video or picture of the vacuum lines or just walk me through it I would greatly appreciate it! I can’t read the schematics I’ve found for anything.
I am getting around 17-18 on the vacuum coming off the intake manifold. The switch for HVAC dash/vent is working. I am not throwing any codes. I have the EGR hooked up to the sensor but not to the heads due to a cutting job and no longer have a vac can.
Thread
Thread Starter
Forum
Replies
Last Post
dleavitt
1987 - 1996 F150 & Larger F-Series Trucks
17
09-13-2016 08:04 AM
fordf350man
1987 - 1996 F150 & Larger F-Series Trucks
2
07-08-2015 08:30 AM
Rick_Fury
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
8
11-04-2011 06:34 PM