Wanted: divorced np203 and "Highboy" bed. Prefer in the Phoenix to Yuma area. Will consider driving to other areas if the price is right.

 

Want a 351W. Doesn't matter what shape, just let me know.

Thanks

 

Wanted- 1987-91 5.0 motor, preferably running. Going in a 91 Bronco.

 

Also looking for a good 300 I-6. Fuel injected preferred, but the carb version would be fine. Hopefully in good shape.

 

Looking for a 65-66 F100 with a stepside and shortbox.

Trades possible.

 

I have a 1965 F100, no title, doesn't run. Was originally a Tennesee air force truck, it is in rough shape. It hasn't ran since 94, I've had it since 2001. Things I know it needs: carb, thermostat housing, brakes, and primary ignition wiring. (idiots that had it before me actually had a house hold light switch rigged up.) it also has a three on the tree and the engine is a 240. If you are interested, my address is knottj@***.net, and I could send you some photos. I want at least $300 for it.

 

I am lookin for 2 2wd quads and a trailer.

Also an aluminum 16x7 wheel from a 99-02 XLT superduty

 

Hello, I was wondering if any one in the valley area but more to the east side would happen to have any truck parts for a 67'-72' F100. I am specifically looking for a steering column, clutch/brake pedal bushing, maybe a steering wheel(mine is not orig and have no clue what its from) let me know,
thnx alot,
MustangMann(Sean)

 

Wanted:
Steering wheel center section with cruise control buttons. 1986 F350 6.9D XL, black with wood grain. Plastic around horn is deteriorating.

 

Looking for a donor car/truck with a 428, 390 or 360 for our 56 F100. Must run and be attached to a C6. Thanks

 

Need a windshield for our 56. Must be in great condition. Rubber too.

 

Need a front tilt kit for hood of our 55 F100.

 

looking for a busted or running v10, for a mustang engine swap.

 

Looking for a Dana 60 front axle, preferrably cheap!

 

looking for 73-79 crew cab, (cab only) i need the back door jambs for a project. will take whole truck if i have to. 602-290-0313

Paul