Tradin/Selling/Wanted Washington state thread
#18
For Sale Miller AC 225V Thunderbolt Welder with leads, works great $125.00
http://www.millerwelds.com/om/o116e_mil.pdf
http://www.millerwelds.com/om/o116e_mil.pdf
#19
Selling 1978 F250 Supercab, 4x2, 400M, Auto C-6. It has a 1979 front clip. 142K miles. It runs but not well. $600 obo.
The 400M engine heads need cleaning, there is carbon buildup on the top of the heads. At least one set of valves needs work/replacement.
The body has rust around the rear wheel wells and at the bottom of the cab.
The C-6 drive train and axles are good. Tires are good. Glass is good. I'm keeping the toolbox
Here's a new picture:
The 400M engine heads need cleaning, there is carbon buildup on the top of the heads. At least one set of valves needs work/replacement.
The body has rust around the rear wheel wells and at the bottom of the cab.
The C-6 drive train and axles are good. Tires are good. Glass is good. I'm keeping the toolbox
Here's a new picture:
#21
Originally Posted by RexB
Selling 1978 F250 Supercab, 4x2, 400M, Auto C-6. It has a 1979 front clip. 142K miles. It runs but not well. $600 obo.
The 400M engine heads need cleaning, there is carbon buildup on the top of the heads. At least one set of valves needs work/replacement.
The body has rust around the rear wheel wells and at the bottom of the cab.
The C-6 drive train and axles are good. Tires are good. Glass is good. I'm keeping the toolbox
Here's a new picture:
The 400M engine heads need cleaning, there is carbon buildup on the top of the heads. At least one set of valves needs work/replacement.
The body has rust around the rear wheel wells and at the bottom of the cab.
The C-6 drive train and axles are good. Tires are good. Glass is good. I'm keeping the toolbox
Here's a new picture:
#22
Originally Posted by Placermike
Does it runs well enough to make a ferry trip to the penninsula then a drive to Sequim?
Mike, the bed is the design that has a lockable "tool box" inset on the passenger side, I love that thing. Also the interior is good except for the driver's side door panel -- it ripped off in my hand when the wind blew the door open. One gas tank has a hole in it. The electrical system is good. I put a Class III 2" receiver tow hitch on it. CB radio.
Originally Posted by "Ford_Six
Once I make some calls and get some tires, I can take a leg of a haul, if you want........
Then again that'd be a good reason for a get-together to get the 'ol truck over to Sequim.
Last edited by RexB; 02-24-2007 at 10:55 AM.
#24
Originally Posted by HawksNest
Do you want a runner? or a core for rebuilding?
#25
AUTO XRAY Scanner For Sale
I have an AUTO XRAY Scanner I bought a few years ago and I do not need it. It's the EZ-Link PRO PACK.
Comes with 5 interface cablels for Ford, GM, Chrysler, 1 Generic and 1 Manufacturer Specific. Domestic/Asian/European.
Reads OBD 2 & OBD 1 . Will also read Ford KOEO / KOER / DCL data scan.
Also comes with a computer cable & software so you can upload scanner to you putter and track readings. All fits in a hardshell case!!!
I am in this over $500, would like to get $250.00 I'll pay for shipping in WA or drop it off if not to far.
Oh I almost forgot it's in like new cond. Only used it a few times and stored in the house.
Comes with 5 interface cablels for Ford, GM, Chrysler, 1 Generic and 1 Manufacturer Specific. Domestic/Asian/European.
Reads OBD 2 & OBD 1 . Will also read Ford KOEO / KOER / DCL data scan.
Also comes with a computer cable & software so you can upload scanner to you putter and track readings. All fits in a hardshell case!!!
I am in this over $500, would like to get $250.00 I'll pay for shipping in WA or drop it off if not to far.
Oh I almost forgot it's in like new cond. Only used it a few times and stored in the house.
Last edited by JR182PILOT; 02-28-2007 at 05:44 PM.
#26
I have a set of 16.5 inch Weld Typhoon rims and a brand new set of 35x12.5x16.5 Super Swamper Thornbirds for sale. 800 dollars for the whole deal. The tires have about 80 miles on them!
EDIT: I think the bolt pattern on the wheels is 8x170. I know they fit my 1999 F-250 SD.
EDIT: I think the bolt pattern on the wheels is 8x170. I know they fit my 1999 F-250 SD.
#27
Originally Posted by 993/4ton
I have a set of 16.5 inch Weld Typhoon rims and a brand new set of 35x12.5x16.5 Super Swamper Thornbirds for sale. 800 dollars for the whole deal. The tires have about 80 miles on them!
EDIT: I think the bolt pattern on the wheels is 8x170. I know they fit my 1999 F-250 SD.
EDIT: I think the bolt pattern on the wheels is 8x170. I know they fit my 1999 F-250 SD.
#28
Originally Posted by JR182PILOT
I have an AUTO XRAY Scanner I bought a few years ago and I do not need it. It's the EZ-Link PRO PACK.
Comes with 5 interface cablels for Ford, GM, Chrysler, 1 Generic and 1 Manufacturer Specific. Domestic/Asian/European.
Reads OBD 2 & OBD 1 . Will also read Ford KOEO / KOER / DCL data scan.
Also comes with a computer cable & software so you can upload scanner to you putter and track readings. All fits in a hardshell case!!!
I am in this over $500, would like to get $250.00 I'll pay for shipping in WA or drop it off if not to far.
Oh I almost forgot it's in like new cond. Only used it a few times and stored in the house.
Comes with 5 interface cablels for Ford, GM, Chrysler, 1 Generic and 1 Manufacturer Specific. Domestic/Asian/European.
Reads OBD 2 & OBD 1 . Will also read Ford KOEO / KOER / DCL data scan.
Also comes with a computer cable & software so you can upload scanner to you putter and track readings. All fits in a hardshell case!!!
I am in this over $500, would like to get $250.00 I'll pay for shipping in WA or drop it off if not to far.
Oh I almost forgot it's in like new cond. Only used it a few times and stored in the house.
If you
#29
1966 Long Wide side - Already has tilt wheel, power steering, power brakes with dual master cylinder and tranny swapped to automatic. Has a 240 with what I believe is a blown head gasket. Recent new parts are master cylinder, power booster and rebuilt carb (has automatic choke). No rust through in the bed and limited rust else where. Excellent radiator support and glass. Give me $50.00 and I'll throw in the 2 new Dennis Carpenter chrome mirrors that I threw on it after these pictures were taken.
Cost? $0.00 I would rather have a slick fan get it than have the donation place get it and send it off to the crusher. It needs to be gone in the next two weeks so I have room for my 61 Truck camper that's going on my 66 camper special.
Ron McDonald
Lakewood, WA
253.503.8892
PS. I will also throw in a late model 300 for it (use the 240 head and you get some awsome compression)
Cost? $0.00 I would rather have a slick fan get it than have the donation place get it and send it off to the crusher. It needs to be gone in the next two weeks so I have room for my 61 Truck camper that's going on my 66 camper special.
Ron McDonald
Lakewood, WA
253.503.8892
PS. I will also throw in a late model 300 for it (use the 240 head and you get some awsome compression)
#30
I have a DeeZee deep box, its about 4 months old, bought brand new installed once (super easy to remove and put back on) locks work, one very small ding that i can think of, it was $337 with tax brand new, i am asking $225 if interested, i live in Gig Harbor.
# 8766DL(B) - deep style
• Fits full size trucks
• Length: 69.75" • L-1: 60.75" • Width: 20.5" • W-1: 17.125"
• Height: 20" • H-1: 17" • Vol: 12.75 cu ft.
its on this:
# 8766DL(B) - deep style
• Fits full size trucks
• Length: 69.75" • L-1: 60.75" • Width: 20.5" • W-1: 17.125"
• Height: 20" • H-1: 17" • Vol: 12.75 cu ft.
its on this: