anybody gotta pic on how to put the jack back in the engine compartment CORRECTLY...i took it out to make sure it all worked and cant figure out how to get the thing back in now--any help is great

thanks

 

If your 97 is like my 95 the yellow plastic collar on the jack that goes around where you put the crank handle goes toward the engine, the bracket that the wingbolt goes through has a "V" that centers on the seam between the two halves of the jack housing, the base plate fits into the opening in the fender brace, the top of the jack actually points toward the firewall. Hope this helps, I don't have access to my digital camera right now.

Dave / Believer45

 

I hope this works. First time I've posted pictures.

This might not be correct but I've had the jack wedged inther for a couple years with no movement
JIM