New Hampshire Chapter Join Chapter Leader: 7283-F250

Need a good body shop.

Thread Tools
 
Search this Thread
 
  #1  
Old 06-20-2006, 10:26 AM
7283-F250's Avatar
7283-F250
7283-F250 is offline
Cargo Master
Thread Starter
Join Date: Sep 2004
Location: NH
Posts: 3,428
Likes: 0
Received 2 Likes on 2 Posts
Need a good body shop.

I did a "oops" this weekend.

Funny how a full size truck with a big block does not let you feel yourself hitting a car and crushing in the side panel. Yep didn't feel a thing.

anyway I need a body shop or a decent bady man looks to make a few extra bucks.

Of if someone can tell me anythg about the following body shops:
Brapone Collision Center (Concord)
Exterior Auto Works (Rt 3A Bow)

Thanks.
 
  #2  
Old 06-24-2006, 12:30 PM
scottma978's Avatar
scottma978
scottma978 is offline
Junior User
Join Date: Jan 2006
Location: massachusetts
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
body shop

if you will go as far as leominster....try leominster collision ...ask for todd. shouldn;t be hard to get him on the phone he is the only one that works there..lol....he does excellent work.sorry, I do not have his number off hand.

scott
 
  #3  
Old 06-24-2006, 04:40 PM
7283-F250's Avatar
7283-F250
7283-F250 is offline
Cargo Master
Thread Starter
Join Date: Sep 2004
Location: NH
Posts: 3,428
Likes: 0
Received 2 Likes on 2 Posts
Leominster is out Rt 2 correct????

I actually found a decent shop right in my home town like 2 minutes away. I didn't even think of the guy because he does mechanical and body work.
 
  #4  
Old 06-24-2006, 11:58 PM
scottma978's Avatar
scottma978
scottma978 is offline
Junior User
Join Date: Jan 2006
Location: massachusetts
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
yep...route 2 10 miles west of 495
 
  #5  
Old 06-26-2006, 09:20 AM
7283-F250's Avatar
7283-F250
7283-F250 is offline
Cargo Master
Thread Starter
Join Date: Sep 2004
Location: NH
Posts: 3,428
Likes: 0
Received 2 Likes on 2 Posts
I bought a parts truck from a guy out there. That was a long night and ended up being a "big" mistake on my part. I should have know it when I rear tire fell off while towing it home.
 
  #6  
Old 06-27-2006, 06:58 AM
mlafortu's Avatar
mlafortu
mlafortu is offline
Junior User
Join Date: Dec 2004
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Kim had her Cougar's aftermarket hood done at Henry's in Manchester. I'm really picky about body work, and I have to say they did an awsome job. They're not really cheap though. I'd say as far as cost, they are middle of the road. If you want the best, most expensive go with Classic Chassis in Hooksett. To me, you get what you pay for in body work.
 
  #7  
Old 06-28-2006, 07:23 AM
7283-F250's Avatar
7283-F250
7283-F250 is offline
Cargo Master
Thread Starter
Join Date: Sep 2004
Location: NH
Posts: 3,428
Likes: 0
Received 2 Likes on 2 Posts
You I know you get what you pay for. Everywhere I went I asked them what they were going to do to fix it. I don't know a whole lot about body work but I know enough to know what needs to be done and a general knowledge of how.

I have heard from several peopel that Henry's is good but they seemed to go down hill a bit after they moved into the new building next door to VW. A buddy of mine brought his focus there and they managed to loose his keys and would not pay for a new one when he told them it would be $100 to have a new key cut and programed by Ford. He wasn't really impressed by them but they did do good enough work for him.
 
  #8  
Old 06-28-2006, 10:29 AM
mlafortu's Avatar
mlafortu
mlafortu is offline
Junior User
Join Date: Dec 2004
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Doh!! That sucks about his keys!! I'd be pissed.
 




All times are GMT -5. The time now is 04:02 PM.