Coil drop-down voltage?
#1
Coil drop-down voltage?
Talking about an '87 E-350 with a 460, automatic and Holley carb.
Battery has 12.7 volts. With ignition on, wires on harness [detached] going into the coil have 11.8 volts. With harness attached there are only 5 volts at the coil. Using remote starter, can't see any spark into distributor. Can't figure what's going on. Any suggestions?
Battery has 12.7 volts. With ignition on, wires on harness [detached] going into the coil have 11.8 volts. With harness attached there are only 5 volts at the coil. Using remote starter, can't see any spark into distributor. Can't figure what's going on. Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
hanajack
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
17
02-12-2024 05:22 PM
cjben
1987 - 1996 F150 & Larger F-Series Trucks
13
08-16-2011 02:58 AM