You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
It appears we have an opportunity to create our own logo to go on shirts and hats etc. I started this thread to get some ideas for a logo so when we meet eachother out on the street we can recognise who are members.
I dont really have an idea for a logo but I would like it to include an outline of the state.
Me like CB. But maybe have it without the state seal. Just an idea. Can you take that out an then we can see what it looks like. The Ford truck logo would be bigger which would be good. Great start man were getting there.
Hmm, looks like the Iowa flag modified... Looks like you guys are at a little of a disadvantage, being your flag is a single color, like South Dakota's. Check out Kansas' logo, might help inspire a bit.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Well, for the sake of CB keeping his lunch down....I agree with Rob. Too bad we could put a ford emblem in place of the state seal in CB's image. I like what he's done so far, though.
No reason you can't, it's your emblem, and does not have to have the state seal or state flag used, it's all what you want on it. By having the outline, it is easy to know at a glance that it is the Nebreaska chapter, like I said, check out the Kansas chapter logo...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
I like CB's logo. The state seal looks pretty good. I agree no big N and also no corn cobs. Altho I would entertain a picture of a bull and some catchy saying like "You can't feed us any bull".
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
Looks like you guys are at a little of a disadvantage, being your flag is a single color, like South Dakota's. Check out Kansas' logo, might help inspire a bit.
