Hey all. I just pulled the column out of my '76 f250 4x4 and the bottom bushing assembly is shot (bronze bushing inside a plastic housing that snaps into the end of the tube). I looked in my Dennis Carpenter catalog and can't find one, anyone know where I could get one of these bushings?

 

I have been useing an enclosed roller bearing on my trucks.It will slide up into the end of the colume then tack weld it,it'll never wear out!These are avalable at industial supply houses such as mcmaster-carr for about $10.

Dennis

 

[font color=red size=3]Auto Krafters has the correct bearings for the steering column.

Marty

"Cleverly Disguised as a Resposible Adult"[/font]

 

Thanks guys, I finally found a place that had them.