i am in need of a divorced np205, i need one for my latest project. i have heard however that you can make a married np205 a into a divorced one. i have been looking around and i havent seen any pre made kits. if anyone knows where i can find a convesion kit or a divorced 205 i would be very thankful.
shawn

 

never heard of converting a married into a divorced but then again i have never looked into it! can't help ya there but you should be able to find some divorced cases.

i can get ahold of several for ya but depending on where you live it wont be worth it due to shipping

-cutts-

 

I've never seen one converted either.

 

itd be alot easier to find a divorced case, because your going to need an input shaft with male spllines for the input yoke....

 

i've done the conversion to married and i just found a donor t-case... cost me 200 bucks when all was said and done.. i say just find a divorced unit... JMO

 

thanks guys. i appreciate it

 

I am currently looking for a divorced np205 to twin stick for my 73 highboy, but never seem to find any.

 

I'm liking where you're going with your 73. Are those superduty lift springs? Where you located in WI? I've got a divorced NP205 sitting in the shed...

 

I had the springs custom made, I am from the Appleton, Wi, Where you at?

 

I'm about 10 minutes east of Madison... What axle gear ratios are you running / planning to run with the 44's?

 

5.13's, when i get the $$$$.

 

I know of three divorced np205 right now.. doesn't help me, i need a married case.

 

#12 Today, 05:19 PM
bremen242
Postmaster Join Date: Jan 2002
Location: Greensburg, PA
Posts: 3,364
Signature

I know of three divorced np205 right now.. doesn't help me, i need a married case.


well how much for a good tcase w/ shipping to florida. there's never any good needed parts down here and when you find them they cost a couple bucks less than nos or rebuilt.

 

not sure.. saw three of them in highboys at an old timer's junkyard.. i can't imagine the shipping for something that weighs that much.

 

too bad cause i have 3 married cases sitting in the garage right now and one of them is twinsticked/rebuilt!

dude, you do NOT wanna ship a 205! you would be WAYYYY better finding one locally. these things are ~170lbs without the adapter, shifters, oil, any crossmembers. just the case itself. you are talking at least $150 for shipping

-cutts-