Hello all I have a 97 f 150. The bumper has the holes in it for the foglights checked today and the wires are there too. is it possible to buy regular fog/driving lights and put em in there? I found some that have both fog and driving lights with a off fog drive switch. I wonder if these will work or if they have to be wired into the existing switch.

 

You can run separate wires to them. The factory plugs will operate from the headlight switch with the driving light equiped factory switch.

 

Odds are that you don't have the headlight switch w/ the driving light equiped factory switch though.

 

No, it will have to be bought.

 

Any relays that have to be purchased and installed into sockets that might currently be empty?