hey i have a holly carb and i am curious as to what it fits.

i found it at my dads auto parts store with a tag on it that says

"big ford trucks"
"1969-1978"
330,359 and 361 engines

does anyone know if this carb fits any other engines ?

 

Is it a 2BBL, 4BBL, does it have automatic transmission linkage on it, is there a list number on the choke horn?

 

it is a 2bbl,


oh yeah and this carb is a stock ford carb it is not a aftermarket carb just so you know.

i dont know what you mean by automatic trans linkage

yeah there are numbers on it, here they are

D4TE-9510-ALA
LIST-6819(# your looking for ???)
2788

those are the numbers i see on it

there is also a 410 stamped on the plate what does that mean ? cfm ?

if not does anyone know what cfm this carb is ?

 

D4TE is a 1974 truck. It May even have a governor on it. It is a Holley carb.
You can go to Holley.com and e-mail them with the info that you have and they should be able to give you the specs on it.

 

ok, thanks i was told by a guy that i know that it was off of a 74 ford truck but he didnt know what the rest of the numbers meant.


anyways i'll ceck with holly and see

does anyone know if this carb is worth anything becuase these engines seem to be very uncommon.

 

Those sound like pretty standard FT engines, something you'ld find in an F-500 or F-600, from the mid sixties through the mid seventies. I do know that if it has the governer on it, and the whole thing works, you could probably ebay it for a good chunk of money. The later carbs, off of a mid-eighties 370, go for upwards of $500 as a crappy rebuild.

 

thanks for your help.

what do you think a good starting bid would be on ebay for this carb or how much do you think i could get out of it ?


i realy have no clue as to what condition this thing is in, i'm guessing it could stand to be rebuilt but i dont know.

can you yell anything by the pics i took ?
http://pg.photos.yahoo.com/ph/ford_m.../ph//my_photos

if you could tell me anything by these pics or need me to take more i'd be more than happy to do so. i think i might put this n ebay if i get a clue as too how much it is worth

 

Yes it has a governor and appears to be a Ford reman carb. You might try local parts houses and look for a new carb with the numbers that you have. This will give you a roundabout price.

 

well my dad owns a parts store and i know all the owners of the local auto parts stores so i'll check what a new one cost. thanks for your help