Torque!
#2
07-05-2005, 05:15 PM
Elder User
Join Date: May 2001
Location: Owasso Oklahoma USA
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
What year and truck model? Lots of different HP and torque figures depending on if it was in a car or truck. Figures for HP and torque generally are lower as model year goes up ending in the trucks in 1964. 1957 was the peak for HP in the Y block.
Check this link for specs http://members.aol.com/kalispell7/specifications.htm
1957 was also the first year for the Ford 9 inch rear axle in pickup trucks. Lots of ratios available now for this axle. The older Spicer 44 rear axle came in the F100 in 3.92, 4.27, and 4.09 ratios. Good for pulling a load in their day. Even higher ratios were available in the F250.
Check this link for specs http://members.aol.com/kalispell7/specifications.htm
1957 was also the first year for the Ford 9 inch rear axle in pickup trucks. Lots of ratios available now for this axle. The older Spicer 44 rear axle came in the F100 in 3.92, 4.27, and 4.09 ratios. Good for pulling a load in their day. Even higher ratios were available in the F250.
Last edited by rogerf100; 07-05-2005 at 05:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Deereguy90
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
2
08-16-2011 10:05 PM