Has anyone made the steering conversion with the new passenger side steering arm and custom drag link. Im looking at doing it and have found a couple sites to get the parts but just wondered if anyone has already done it. If anyone could give me some pointers or at least some mistakes you might have learned I'd appreciate it.
I have a 78 3/4ton 4x4 with bumb steer like most lifted trucks and so I want to install the cross over steering to help correct it.
Who would you recommend for a manufacturer of the steering arm and draglink? Also does anyone know of a good machine shop in Anchorage who can drill the correct holes for the steering arm? http://www.sevenmile.net/xover.htm
Last edited by AK4Wheeler; 04-14-2005 at 02:28 AM.
i got a 78 d60 from a ford in my chevy and put the crossover steering on with high steer and a hydralic ram, pretty easy stuff. i got my draglink and tierod ends online. cant remeber from who though was a couple years ago. way better then stock steering if its lifted high. im in anchorage you can come look at my setup if you want. or i can email you pictures.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.