In order to move my wrecker body/crane around, I'm in need of either a full frame/chassis, or at least a good rear half. I want to have a frame that I can temporarily bolt the unit to so that I can move it back and forth from the body shop, to the sandblasting shop and back. (In other words, this frame would be the basis to make the unit into a trailer. I have everything I need to weld on a tongue.) It will not be ready for mounting to my '56 F-350 until part of it is 'blasted, the front of the body painted and the rear of the cab painted. To me, this is easier that loading onto and unloading from a trailer or rollback. So, anyone have or know where I can obtain a frame, hopefully close to Augusta? Thanks in advance. By the way, I believe a frame from '53-'62 F-250 or F-350 would work.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.