I have the whole setup for swapping to propane but I don't know of the condition of the regulator or the carb. They look nice and clean but I don't want to risk blowing myself or others up. Should I ask the gas company for houses because their truck run on the same setup? Thanks!
I would think they could direct you to a source if they don't do it themselves.
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
There's not much to them, if it doesn't look like it's been driven over by a cat then it's probably ok. Just make sure you don't forget the propane lock-off... the vacuum(usually) operated device that flows liquid propane only when there is vacuum.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.