1987 Ranger STX, Parts

sublimecharger68 · #1 (**permalink**) 12-02-2002, 11:54 AM

hello all is there any place online to find the STX Sticker Kit for an 1987 Ranger? I am thinking of rebuilding my 87 STX Ranger and would need this sticker kit, and also the Soft Tonnaeu cover for this truck that Has the Roll Bar cutout's.
and would also need the light's to the Roll Bar and the light cover's,
Wanna make the truck look like it did when it rolled off the factory floor, cept gonna put a 302 under the hood,

Thanks for your help,

Torque1st · #2 (**permalink**) 12-03-2002, 12:39 AM

Check with local bodyshops to see if they have sources for replacement stickers.

Thanks for using FTE!

[font color=red]As a Moderator I do not "Subscribe" to most topics,
please send email/pm if you need a reply -Thanks![/font]
-

mathelm · #3 (**permalink**) 12-05-2002, 05:03 PM

Doin the same thing here...

http://ebay0.ipixmedia.com/abc/M28/_EBAY_069d97799da5345df850b4bd94609e4e/i-1.JPG

sublimecharger68 · #4 (**permalink**) 12-05-2002, 06:18 PM

Yea mine pretty much looks like either of those you guy's posted cept, also has Sunroof and Lighted Visor on the old girl now, 168,000 miles and the 2.9 is getting tired, gonna drop in a 302 next summer, that only has 13,000 miles and if she runs smooth after that would like to have the body redone, but would like to save pennies where I can so I hope that if I can find the Sticker Kit online and some other parts Tonneau Cover, new hubs, and figure on a new 4X4 drive motor and a Front Fender and Door on the Passenger side, she was attacked by a Chevy bully! she can once again be cherry,

just gotta love the Ranger STX,

sublimecharger68

PCD · #5 (**permalink**) 12-06-2002, 03:00 PM

tjohnson · #6 (**permalink**) 12-08-2002, 08:51 PM

I actually painted my stripes on, they're black with red pearl.
Get a glimpse at
http://www.clubfte.com/users/tjohnson/

*87 ranger STX
2.9, K&N cone, Magnaflow, MSD, Flex-a-lite electric fan, Optima
31x10.50 BFG Mud terrains
15x8 Eagle 117's
6" skyjacker
Sikkens silver metallic
Ford grillgaurd, rollbar (off), tubular rear bumper all powdercoated gloss black
Delta crossbed toolbox
Alpine deck, clarion rears, jl fronts,
Rocford Fosgate-punch 100, punch 250,and 10"HE2
Nice dark window tint
Vanilla little tree
Hella FF100 fog lights

tjohnson · #7 (**permalink**) 12-08-2002, 08:54 PM

I forgot to maention that I looked for stripes for a while but didn't find any other than at a dealership and they wanted over $300. that was 2 1/2 years ago maybe there are some online now. Good luck.