You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
As the Chapter leader of the newly formed Illinois Chapter..............I have a question.
This would apply to the Indiana, Wisconsin and Iowa Chapters. Would there be any interest in ,at a future date, holding a "Midwest" meeting amoung the four states?
The Illinois Chapter is two weeks old at this point and eager to get our feet wet and get involved.
Just a thought.....Thanks, Ron
__________________
Welcome to AMERICA.....now learn to speak english!
Hey, sorry I overlooked this, it was at a very bad time for me. We can look into doing it at least for our 2 states, I have enough people in the eastern half to make it worthwhile. We even have a few common members. If you or some of your members have a location in mind, that would be good, or I can see on my side too, I have 3-4 in the Burlington area alone. Add the additional 4 or so south from there, (including me) and that's not a shabby number right here, not to mention the others that may be able to travel and make it.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Hi....I have family down your way. Well..........a meeting in Quincy, Illinois could be one potential meeting location? Maybe the Missuri side or St. Louis too?
__________________
Welcome to AMERICA.....now learn to speak english!
I'm in Kentucky and for right now I'm a member in the Ohio group. I have family in Plainfield Il. If you are planning for something in the spring I might be able to attend.
__________________ Ryan > Kentucky chapter member
Saying a person carrying a gun is out looking for trouble is like saying that by wearing a seat belt you are looking to get into a violent accident...
that's getting a bit south for my Iowa guys, I may be in Missouri, but even Quincy is south to me.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Quad Cities would probably work pretty good, I can run it by my guys see what they think. I'll just show this thread to them. Hadn't done that just yet.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Keokuk would work wonderful for me, as I live 30 miles from it. It would make a great point for the 3 states to get together. I'll keep the Mo guys posted, as I am a member there too.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Trying to remember, they have a Civil war re-enactment sometime in the summer, can't remember quite when, have to look into it. But the funny thing about that is that the battle they reenact actually took place on the farm here where I live, 30 miles away, the battle of Pea Ridge. With that much lead time, though, it will be easier to get everything locked down. I can see if we can reserve the park, and have the whole thing there on our own too. We could also bring it a bit west to Kahoka, and use the fairgrounds there. That's 20 west of Keokuk on 136. We also have some mud pits up to Mt Sterling for those that want to play...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Interest will likely determine where and what we do. Definitely have to keep in touch on it so I can figure out what all we need and what everyone will want to do. Have to keep plugging away at it. Not sure the 4th (Independance day) weekend would be good, ttoo much else going on. Goodguys has a big car show in Des Moines every year, and I'm sure they aren't alone.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.