Buy, Sell, trade,,,
#151
If i recall correctly its a 11 inch or maybe a 12? I bought it awhile back when my clutch was going out and the motor died before the clutch did and since Im upgrading to a 302 I have no use for it. The pressure plate is in good condition the flywheel is runnable but has seen better days. I also have the starter that goes with it if he needs that since I cant use it on what I have. Throwout bearing is in good shape Id bet it would last the life of the new clutch spins nice and is tight still. Tell yopur buddy the clutch is his (when can he pic it up or does he want me to ship?) Id take $15 for the starter if he wanted that or id make him a package deal of $75 for the starter, flywheel, Pressure plate, clutch, throwout bearing and what ever other misc parts that apply. I prefer money order for payment if I ship.
#152
Gocart tires
I don't remember who said they where interested in a set og gocart tires, but HERE is one set...HERE is the other..
The small set I have 5 of and the side of the tire says 4.10/3.50-4 the inside hole on the rim is 5/8"
The big set I have 2 of and the side says 4.10/3.50-6 the inside hole in the rim is 5/8"
I will wait to list them until Sun or monday on ebay to see if any of yall want them first
I listed these on another site also to offer them to those guys also..Shoot me an email with an offer
The small set I have 5 of and the side of the tire says 4.10/3.50-4 the inside hole on the rim is 5/8"
The big set I have 2 of and the side says 4.10/3.50-6 the inside hole in the rim is 5/8"
I will wait to list them until Sun or monday on ebay to see if any of yall want them first
I listed these on another site also to offer them to those guys also..Shoot me an email with an offer
#154
74 302 short block disassembled
This is a 1974 302 that has a .030 bore. It was a running motor w/ TRW 4 relief flat top pistons in it. Stock crank & rods still on pistons. No heads, but does include the balancer,caps & hardware to assemble the short block. $100/OBO located in the Des Moines area.
#155
looking for a saturn tranny. i know its a gm but its for my moms car. its a 99', manual 5 speed, sc1. let me know if youve seen any saturns in any local j yards. thanks
#156
He said he'll take the clutch, throwout bearing, and pressure plate, and he's just gonna get the current flywheel machined if need be.
He'll need it shipped, could you find out how much it'd cost for shipping? This isn't an ASAP thing, either for him.
He'll need it shipped, could you find out how much it'd cost for shipping? This isn't an ASAP thing, either for him.
#158
I have a 460 that I am looking at getting rid of. It is located in Cedar Rapids. I bought it from a friend and decided not to use it. Would like to get around $200 for it. Let me know if anybody is interested.
MOSES
MOSES
#160
TCI Streetfighter Torque Converter p/n 441300
I still have a TCI Streetfighter torque converter for 351M/400 429/460 that would be great for that built 460 or 400. List 525, Summit 425, asking $300.
I've got 20 miles and about 2 hours on it before I had a stuck valve force pulling the engine. While out I swapped to a milder cam and put the stock converter back in. Still has the decal on it.
Located in Cedar Falls.
Thanks!
I've got 20 miles and about 2 hours on it before I had a stuck valve force pulling the engine. While out I swapped to a milder cam and put the stock converter back in. Still has the decal on it.
Located in Cedar Falls.
Thanks!
#161
I bought the 460 about 2 years ago. It was in the guys garage and was said to be pulled from a running car. Since then it has sat in my old roomates garage and he wants it gone. It is pretty much a complete long block. It has the oil pan, 4 bbl intake, and manifolds but no front accessories. It is still free and spins. I have never done any work to it or pulled it apart. I am basically just looking to get what core price is on it. If the price seems to much, just shoot me an offer.
MOSES
MOSES
#163
Fourbyfour...the address here is 721 N 1st Street Centerville IA 52544
It's spring break and Shawn's gone, he'll be able to get things more figured out on Monday. Sorry for the delay.
It's spring break and Shawn's gone, he'll be able to get things more figured out on Monday. Sorry for the delay.
#164
Thanx.
Originally Posted by Saurian
Fourbyfour...the address here is 721 N 1st Street Centerville IA 52544
It's spring break and Shawn's gone, he'll be able to get things more figured out on Monday. Sorry for the delay.
It's spring break and Shawn's gone, he'll be able to get things more figured out on Monday. Sorry for the delay.
Respects
Ford By Four
#165
'78 F150 - parting out
I'm taking my old '78 F150 out of commission. I'll be keeping the nine inch rear axle and wheels. It's got a new brake booster and master cylinder, rebuilt calipers, new front brake hoses, lots of rust in the box, a ratty interior, and a 460/C6 with a spare tranny (condition unknown). Some things like exterior lights and the voltage regulator are already gone. The 460 will run (after repairing the broken bolts and water pump and adding a carb. The engine is ready for a rebuild in my opinion. 150,000 miles approximatly. I do have a current title to go with it, but you'd be better off just using this one for parts.
200 bucks firm for the whole shebang.
Bring a trailer and a winch - no rear axle - only the front rolls.
PM or email me.
200 bucks firm for the whole shebang.
Bring a trailer and a winch - no rear axle - only the front rolls.
PM or email me.