You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Just making sure we have the attention of those interested in attending, in case you all haven't seen the activity on the other thread. Let's get a basic roll call, so we all know what's going down here.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
I'll be there, did we decide for sure on time seems like I remember someone mention the noon hour but might be better at 1pm as the lunch crowd will be thinning out at that time.
__________________
Rob
Learn from your parents mistakes.......... Use birth control
Should I be making reservations, or get our own room? I'm sure there's a charge for the meeting room. ! pm sounds good to me.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
We're only two days out, what's the official time? Why don't we make it 1:30pm? People won't have to get up too early, the lunch crowd will be out, so they won't be as busy and we won't need to pay for a meeting room.
Rick, you still gonna be able to make it or am I driving to Keosauqua by myself and getting lost trying to find Fellro? Hehe
I'm free pretty much all day, so whatever is best by you guys. Taz, you should be able to make it, it's only about 35 miles for you. If it's too much, we'll come get ya though, wouldn't want to have you miss, but Nogo there should be able to help you out. His best route would be through CR.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
If so...would anybody argue with monsterbaby/fellro making the call as they are the two that are up for chapter leader? I think we need to have this taken care of by tonight...since its just tomorrow, you know?
I'm cool with 1:30, gives me more time to do whatever before...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
1:30 works for me it's only a 2 hr drive for me so I can make anytime we want but this does seem to work for everyone all around so I say that should be the time, and place.
__________________
Rob
Learn from your parents mistakes.......... Use birth control
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
Iowa chapter organizing meeting
nogo you got mail now 2 
