I would like to buy a factory tachometer and sender for my 1986 F250. It has a 6.9 diesel engine. I could also use a factory oil-pressure gauge for my truck.

 

Please e-mail the info when you find out about the fact. oil gauge and tach. THANKS !!!

<--- 86 F-350 6.9 L Diesel Dually Ambulance

 

 

I need to go to the junk yard next week. I know there is about 5 fords with 6.9's there I have been getting parts from. I will see if one of them has a good insturment panel and tach sender. I won't charge you anymore than the junkard charged me+the shipping. have agood day.

Brad Godkin
1986 F350 XL CC 2WD, 6.9L/C6

 

Being that the oil sender is not much more than a factor light in guage format. I suggest you install an aftermarket oil presure guage. The original guages are not accurate. They work on an on/off switch and are not really a presure guage.

Dave

http://a2ztowing.homestead.com/a2ztowing.html