hi guys, do any of u know the horizontal measurements for a 56 f100 chassis, more presicely is the front horn area that appears to be horizontal 1" lower than the centre section of the rail side.
i had hoped that somebody had a copy of the factory dimensions, i'm not sure if the body book shows these, any help would really be appreciated.
cya..gary

 

gary,
See if this helps.

Good Luck,

 

thanks, but i have the same diagram in the 56 shop manual, the front measurement does'nt say if the figures include the thickness of the rails or not, thats why i was hoping the body shop manual would give this.
other books i have on mercs etc give very detailed imfo from all angles, but i don't have a M100 - 56 book
some one in cyber space must have.
cya gary