I need a carburetor for a 88 ranger 2.0, and im wondering if there's any place online that sell them. I checked my local auto stores but they want like $430 for it. Tried searching online but cant seem to find anything. Any suggestions?
I have the same problem. If you do find a reasonable solution please don't forget to share it. What I did was to take a carb from a Topaz and fab up and adapter plate from two layers of Teflon.It runs, passed the emission test.... but after all that it has a very stiff gas pedal and need to be constant adjustment depending on the weather. Surely there must be an older model carb that will bolt on with out all of these problems. Let us know what you find out. Thanks and good luck!
Welcome to you both, Ron1988Ranger and apater.
Have you tried calling Holley to see what they have?
97 Ranger (metric half ton) 2.3,5spd. Saphire blue metalic w/matching cap & Stock Rims 4 winter.
92 Town Car....Sweet PITA.
90 BII 4x4 Ongoing Project, aka PITA
63 Fairlane, Gone to my buddy Chuck.
It Aint Fun Unless It's Done The Hard Way!
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.