heater core
#1
03-13-2002, 08:07 PM
Join Date: Dec 2001
Location: Iberia, USA
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
heater core
i was just lookin(still admiring my new truck!
) at my glove box and i pulled it down to see behind it. anyhow i noticed this boxy area with screws around it and i was wondering if anybody knows if it is how to get access to the heater core? i also seen this plunger and figured that it was part of what changes the blower mode. so i reached up and turned the **** and it moved. no big deal, right, but the key was off!?
i was just wonderin why that happened. what causes this part to operate? thanks.
-nathan
) at my glove box and i pulled it down to see behind it. anyhow i noticed this boxy area with screws around it and i was wondering if anybody knows if it is how to get access to the heater core? i also seen this plunger and figured that it was part of what changes the blower mode. so i reached up and turned the **** and it moved. no big deal, right, but the key was off!? i was just wonderin why that happened. what causes this part to operate? thanks.-nathan
#2
03-13-2002, 09:15 PM
heater core
>i was just lookin(still admiring my new truck!) at my
>glove box and i pulled it down to see behind it. anyhow i
>noticed this boxy area with screws around it and i was
>wondering if anybody knows if it is how to get access to the
>heater core?
Yes that is the heater core.
>i also seen this plunger and figured that it
>was part of what changes the blower mode.
The plunger controls the air flow to either the panel or the floor by moving a door.
>so i reached up and turned the **** and it moved. no big deal, >right, but the key was off!? i was just wonderin why that
>happened. what causes this part to operate? thanks.
You just broke it. Stop doin' stuff like that!
It is vacuum operated. When you switch to "floor" or "floor/panel" this moves the door to route the air.
) at my >glove box and i pulled it down to see behind it. anyhow i
>noticed this boxy area with screws around it and i was
>wondering if anybody knows if it is how to get access to the
>heater core?
Yes that is the heater core.
>i also seen this plunger and figured that it
>was part of what changes the blower mode.
The plunger controls the air flow to either the panel or the floor by moving a door.
>so i reached up and turned the **** and it moved. no big deal, >right, but the key was off!?
i was just wonderin why that >happened. what causes this part to operate? thanks.
You just broke it. Stop doin' stuff like that!
It is vacuum operated. When you switch to "floor" or "floor/panel" this moves the door to route the air.
#3
03-13-2002, 10:17 PM
Join Date: Dec 2001
Location: Iberia, USA
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
at least i have a warranty!
#5
03-14-2002, 10:08 PM
Join Date: Dec 2001
Location: Iberia, USA
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
(i didnt ferget my smilie
)
