1988 460 stock power?
#1
01-29-2004, 08:07 PM
1988 460 stock power?
Yeah probably a newbie question but I searched and couldn't find the answer... What are the output figures of a stock '88 EFI 460? Also, what are the limitations of the stock EFI system? This motor is going in a truck that will be used for a lot of grunt work and some mild mud bogging/racing. I would like around 400hp, and 500ft lbs...
#2
01-29-2004, 11:11 PM
Senior User
Join Date: Jun 2003
Location: Edmonton Alberta Canada
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
I have already posted on this, but I'll do it again
185 Hp and 270 lb/ft of torque at the rear wheels, (remember this is going through a C6, NP205 and 9")
which equates in a round about way to about 255 hp and 365 lb/ft of torque
I'm also running with the air silencers cut off of my intake, and dual 2 1/4" exhaust (a little restrictive)
185 Hp and 270 lb/ft of torque at the rear wheels, (remember this is going through a C6, NP205 and 9")
which equates in a round about way to about 255 hp and 365 lb/ft of torque
I'm also running with the air silencers cut off of my intake, and dual 2 1/4" exhaust (a little restrictive)
Last edited by i_alone; 01-29-2004 at 11:15 PM.
#3
01-30-2004, 11:11 AM
Thread
Thread Starter
Forum
Replies
Last Post
96f350rcsrw460zf
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
59
09-12-2018 10:48 AM
Chadder1313
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
6
03-04-2011 05:50 PM
bchunter
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
2
10-05-2007 02:24 PM
bigsnag
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
5
03-07-2002 01:14 AM
