Need help finding PCM code
#1
Need help finding PCM code
I have a 1994 F-150 XL, RCLB, 300 I-6, 5-Speed 4x4, that the PCM went out on years ago and has been sitting in a pasture. The old PCM was removed then misplaced so I cannot get the code off of it. I found one out of a 92 truck with a 300 that confirmed it would still start and run, but not very well at all. I am wanting to start working on this truck and get it running good again and I need to start with the correct PCM.
Calibration code is:
3-51E-R10
F3AE-6E061-HHC
Calibration code is:
3-51E-R10
F3AE-6E061-HHC
#3
#4
We have members here, that can do it, all I did was goggle() 94 f150 cal code (x-xxx-xxx) and you get a good starting point, if you cant read your PCM, it gets tricky, and need exact trans, engine, and year, to get close, rock auto could have same one cheaper, I uesd oreilly's, because if its bad I can get another one over night, and not mail it out, and wait for another one to come.
#5
We have members here, that can do it, all I did was goggle() 94 f150 cal code (x-xxx-xxx) and you get a good starting point, if you cant read your PCM, it gets tricky, and need exact trans, engine, and year, to get close, rock auto could have same one cheaper, I uesd oreilly's, because if its bad I can get another one over night, and not mail it out, and wait for another one to come.
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post
diehardstroker
1999 - 2003 7.3L Power Stroke Diesel
2
09-02-2013 11:45 PM