Hey guys any of you ever find out or get fixed the rattle in the rear window or behind the rear seat!!!!???????

I remember posts about it but never heard if you all had gotten it fixed!!!

 

all the owners of trucks with such problems avoid this forum now.

The tapping on the keyboard reminds them too much of the dreaded sound!!

Sorry guys, but I was wondering the same thing, and was tryin to keep it light!
Sure hope a remedy is found soon for previous, current, and all future rear-sliders!

 

Not to worry, mine is still bugging me periodically. I'm just waiting for someone to come up with a fix. Guess I've just learned to live with it and I'm not to the point that i'm ready to go to my dealer about it.

Thanks for bringing it back up.

 

Hey, I talked to the shop supervisor at the local dealership the other day about this problem. He was aware of it but had only gotten 1 truck in for the repair. He said it was something about a new seal around the back window and when it was installed at the factory it was over tightned causing it press out of place and allow the back glass to come in contact with the metal. All that was needed was to remove the back window and put a another new seal in place and make sure not to overtighten it. He said he did this repair for that one truck about 2 months ago and hasn't heard from the guy since ( so he assumes it fixed it), or the guy could have just gave up. It ticks me off to know that the truck i've got ordered is going to most likely rattle the day i get it.

Ultramax

 

Ultramax:

My rear electric slider doesn't rattle at all and I've listened for it after reading about it on the forum.

George

 

Your 1 of the lucky ones gglines!!!

 

My rear window had the rattle. The dealership replaced the rear window seal and the rattle is gone. No big deal!!!!

 

I guess it's time for me to schedule a new rear window seal!! Thanks for the info guys.

 

Captain Jim,

It sounds like we have the same truck. I have an 04 SCREW 4x4 that is Black w/ Arizona Beige too. You got good taste man!!!!

 

As do you!! You ought to think about an ARE LSII lid for the back. It really makes it look sharp!!

 

Actually I'm in the market right now for a bed cover. Where did you get yours and what did you pay... if you don't mind my asking???

 

Ziebart for $867.08, including tax. Based on the threads i've been reading out there, I paid too much..but I had to have it. The only option I got was the battery operated light.

 

Captian Jim,

Thank's for the info.

 

In case you haven't seen the ARE site, It's

http://www.4are.com/product/lsii/dealers/