lift kit

dlr03f150 · #1 (**permalink**) 12-13-2003, 10:46 PM

what size lift should i go with 35/12.50/16.50 r thanks for your help

85351ho · #2 (**permalink**) 12-13-2003, 11:49 PM

uhhh..

is it a truck?

what kind???

Redneck-Cowboy · #3 (**permalink**) 12-14-2003, 11:56 PM

I would guess approx. 6 in. but a lot depends on the truck.

dlr03f150 · #4 (**permalink**) 12-15-2003, 07:39 AM

sorry, i was in a hurry when i posted. its a 03 f150 xlt w/the fx4 off road pckged. i was thinking to go with a 6" lift and was looking at the fabtech (suspension) if any one has this set-up and could post some pics i would appreciate it. also some opinions on the type of lift to go with would be helpful. thanks for any info

freak98 · #5 (**permalink**) 12-15-2003, 03:48 PM

dlr03f150,I went with a RCD suspension lift and a 3" body lift.Here's picture's.http://www.superford.org/?vID=4037
There in the (MY other truck)heading.

cwb · #6 (**permalink**) 12-15-2003, 08:22 PM

They will fit under a three inch with some minor modifications. I have seen 37's with no glass wheeled hard on a six inch without hitting so you should be o.k. with three.

dlr03f150 · #7 (**permalink**) 12-16-2003, 08:04 AM

freak 98 nice looking trucks. i think im going to go ahead w/the 6" lift for certain fact i dont want to be trimming alot. i will post pics after its done. thanks for your help.

CJack · #8 (**permalink**) 12-29-2003, 10:21 PM

With 35s you have to watch the bumper, not the fender. Your air dam will have to go. I suggest a sahara bar instead of the stock bumper. I havent touched a fender with a 4 inch lift on my rig, but under compression, and with no air dam, I still rub sometimes.