Pillar Guage Mount

f_pumillo · #1 (**permalink**) 11-21-2002, 08:02 AM

Now that I have the computer reprogrammed with the microtuner, I need to add guages (since I do tow over 4K). Anyway I can find guages galore, but a pillar mount (3 Guage) for the X is hard to find. At least on web pages. Any hints as to where to find one for an X. I'm adding, EGT, Boost and Trans Temp.

JoeBoost · #2 (**permalink**) 11-21-2002, 12:29 PM

You might want to check the online store on this site , if you haven't allready. Also , Jegs or Summit mail order has gauge pods all over the place...

Monsta · #3 (**permalink**) 11-21-2002, 12:53 PM

> but a pillar mount (3 Guage) for the X is hard to find.

If it is made for a Super Duty then it'll work on an X. If you have a '02+ then you'll have to remove the A-pillar handle.

Do a search for Autometer. They make pillar gauges and mounts. Also Isspro.

Here... http://216.167.41.9/CoastalData/showdetl.cfm?&DID=30&Product_ID=672&CATID=2 this will help you get started.

f_pumillo · #4 (**permalink**) 11-21-2002, 06:08 PM

Thanks Guys, got several options. Luckily I got an '01 so a super duty will work. Also checked Geno's and found some stuff.

68xr7GT · #5 (**permalink**) 11-22-2002, 12:18 PM