I have dual 61mm's and need the right MASS AIR meter for it, plus whatever piping...
#1
I have dual 61mm's and need the right MASS AIR meter for it, plus whatever piping...
I have the edelbrock truck EFI setup with dual 61mm BBK's and I need to find what Mass air flow meter/unit to get and how to get all the piping to work together.
I have a 1996 which had the 2 pipes in to 1 setup already.
Thanks
Chris
I have a 1996 which had the 2 pipes in to 1 setup already.
Thanks
Chris
#2
#3
I have dual 61mm's and need the right MASS AIR meter for it, plus whatever piping...
Thanks for the advice...the problem is I have no idea which or where to get it. I don't want to call up a shop and tell them I just want a part as I have had problems with a shop unloading the wrong part off on me
anyone have a vendor they dealt with for this part? I will be placing on a 408windsor with 30lbs injectors.
anyone have a vendor they dealt with for this part? I will be placing on a 408windsor with 30lbs injectors.
#4
Thread
Thread Starter
Forum
Replies
Last Post
shuttlevalve
1987 - 1996 F150 & Larger F-Series Trucks
7
11-30-2009 02:12 PM
Steve Butabi
1987 - 1996 F150 & Larger F-Series Trucks
2
09-08-2004 08:24 AM