so I picked up this truck about a month ago I am trying to find we're a vacuum lines goes it is a 1993 Ford F-250 with 460. The vacuume comes out of what I think is the air b air d solenoid up by the driver side firewall. It is the pink vacuume line If someone has a picture of that they could post that would be great Thank you

 

Just went and looked at my 92. Pink line goes to what I would call diverter valve for AIR system. It is located by throttle bracket on pass. side.

 

My 97 Fed Emissions 460 has that same arrangement. The connection on the diverter valve on mine is on the driver's side of the valve and the nipple points at the throttle body.

As an aside, that pink plastic line doesn't hold up well. Every one I found in the JY while looking for a new one for mine was just as brittle/crumbly as the one on my truck.

 

I have a 93 460, and a set of factory service manuals. Will let you know

 

I


Starts at the thermactor air control solenoid



Ends here at nothing on my truck

 

Can't tell from pic, does truck still have AIR pump and diverter valve with hoses etc?

 

If you want, I can take some pics of my truck in the a.m. when I have light to see what I'm trying to photograph. That first photo by Walters shows the loop of line between the two solenoids by the EGR valve on the driver's side of the engine. The second photo (the pink line/black 90 degree elbow with the Oklahoma vacuum plug in it) would be the end that connects to the air diverter/bypass valve. My truck still has all of that hardware, since I live in The People's Republic Of Kalifornistan and it must be smogged bi-annually.