Hey I need help. I was driving my truck the other night acted like it ran out of diesel, pulled it home got it to start took it out on the road again and same thing. I knew my lift pump was going out so I replaced that the Irp and the icp.
Started it up it ran for maybe ten minutes then died and will not start now. I am getting a cam position sensor and putting it on today, but I thought maybe someone would have an idea. I desperately need it running so any help would be awesome Thanks

 

Check this flowchart out and get back to us... Good luck!

https://drive.google.com/file/d/0Byb...1qRU1VVGc/view

 

change fuel filter and clean FPR screen in the fuel bowl?
do you know your fuel PSI at idle and at WOT in 3rd?

 

I did replace the fuel filter and cleaned the fpr screen. Checked the chart. It will start occasionally and run a few seconds then die.

 

I don't know the psi yet.

 

get a 100 PSI tire gauge to check it while cranking and running if you can

 

The tire gauge didn't do anything but spray diesel