Hey guys, i inherited my grandfathers 1996 7.3 PSD about a year ago, I am trying to build it up so his legacy will live on forever. I am in absolute desperate need of the p/s pump bracket, if anyone one has one please contact me. oh and i am new to the entire forums/threads deal. If i am posting this thread in the wrong location please point me into the correct one.

 

I might have one, I'll check and get back later.

 

I have 4 or five of them mounted on motors right now. If you a referring to the large bracket that bolts to the block or accessory mtg...

 

Yes when looking at the front of the engine its on the right and the A/C compressor sits on top of it too. would you be interested in parting with one of them?

 

Yes where am I shipping to? Is what I texted and shipping ok. Same as I sold it for a couple forum members before... Only other bet is to go rob one from a junk yard. Surprised these break so often?

 

Can you private message me so i can send you my cell number, and i have already tried to procure locally , can not find one absolutely anywhere. pm me please.

 

I can't send a PM yet as you only have 4 posts.

 

text my phone then.

 

Done! 👍🏻

 

Nossliw I'd remove ur prices before daddy Tom get upset

 

Ok thanks for the heads up. I forget rules time to time.

 

go edit post to remove phone number so you dont get crazy calls

 

I had one but sounds like your all set.

 

Send me a text with a photo of it .

 

The pump is only held with three bolts.

One of my bolts broke its head off in the driveway. Don't know why. Saw it and didn't realize it was from my truck.

A few days later I was running an errand, restarted the engine and had no steering assist or brake vacuum.

The bracket isn't strong enough to support the pump with only two bolts.