1952 Ford F1 215 Pulleys
#1
1952 Ford F1 215 Pulleys
The fun continues. I got my 215 running last night for the first time in 8 months! Then, I immediately noticed that I had a few more issues than I thought. My water pump is leaking from the lower mounting bolt and one of the two pulley channels on the the harmonic balancer has a huge chip out of it as does the channel on the water pump pulley.
Does anyone have a two belt harmonic balancer or water pump pulley for a 52 215 in their parts stores or know where I could come by one? I have found a water pump but I'm not seeing any pulleys that look like the ones in my truck.
Does anyone have a two belt harmonic balancer or water pump pulley for a 52 215 in their parts stores or know where I could come by one? I have found a water pump but I'm not seeing any pulleys that look like the ones in my truck.
#2
I think you have to press the water pump pulley off your old pump and onto the rebuilt pump. Be very careful when you do this.
Another member was recently looking for a crank pulley. I have one, but have been away for a few weeks. If the other member isn't interested in my pulley I will message you about it.
Another member was recently looking for a crank pulley. I have one, but have been away for a few weeks. If the other member isn't interested in my pulley I will message you about it.
#4
#6
I think you have to press the water pump pulley off your old pump and onto the rebuilt pump. Be very careful when you do this.
Another member was recently looking for a crank pulley. I have one, but have been away for a few weeks. If the other member isn't interested in my pulley I will message you about it.
Another member was recently looking for a crank pulley. I have one, but have been away for a few weeks. If the other member isn't interested in my pulley I will message you about it.
#7
Trending Topics
#8
The fun continues. I got my 215 running last night for the first time in 8 months! Then, I immediately noticed that I had a few more issues than I thought. My water pump is leaking from the lower mounting bolt and one of the two pulley channels on the the harmonic balancer has a huge chip out of it as does the channel on the water pump pulley.
Does anyone have a two belt harmonic balancer or water pump pulley for a 52 215 in their parts stores or know where I could come by one? I have found a water pump but I'm not seeing any pulleys that look like the ones in my truck.
Does anyone have a two belt harmonic balancer or water pump pulley for a 52 215 in their parts stores or know where I could come by one? I have found a water pump but I'm not seeing any pulleys that look like the ones in my truck.
1952/53 215 I-6 trucks / 1954/55 F350/600 & P350/500 223 I-6 / 1956 F500/600 & P350/500 223 I-6.
No Ford dealer or obsolete parts vendor has any.
-------------------------------------------------------
EAG-8509-A .. Single Sheave Water Pump Pulley - 4.62" O.D. x 1.88" depth x .624" I.D. x .64" sheave width / Obsolete
1952/53 F100/600 & P350/500 215 I-6 / 1954/56 F500/600 & P350/500 223 I-6.
OBSOLETE RELIABLE PARTS in Nashville GA has 1 = 229-686-5101.
#9
Sorry I did not see this until today, I'm the guy who needed one but Stu already sent me his old one. However I do have a spare pulley for the water pump if you're still in need of that, just pm me. Sorry I did not see this sooner.
Thread
Thread Starter
Forum
Replies
Last Post
Jasonnoel
1948 - 1956 F1, F100 & Larger F-Series Trucks
30
03-14-2013 10:28 PM
g0dl355
1973 - 1979 F-100 & Larger F-Series Trucks
5
11-15-2009 06:38 PM
mikescamping
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
3
07-08-2000 08:51 AM