When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Since I'm going to be rebuilding and upgrading the 8.8 soon, I'm curious to know if using a seal saver or Redi Sleeve is recommended. I'm interested to know if this would be a good preventative measure to take.
If the grove worn in the yoke from the seal isn't too bad, just clean it up with some scotch bright or emery cloth. If you can catch a finger nail on the grove I'd replace the yoke.
11-24-2016, 01:03 AM
