I have 2013 ford e350 and im trying to replace my rear bearings and i get to point i took out caliper bracket off and spindle slide out and special key to remove hub with rotor but now i have everything loose my rotor won't come off it seems it's stuck on emergency brake . It came half way out but top won't budge i have it loose side ways but top won't come off am i missing something help.

 

may need to turn the adjusting sprocket down to loosen the E brake.
Maybe spray some cleaner in there and hit it with a hammer around the edges to see if it will let go.

 

If everything else is disconnected and loosened, work around the rotor with a dead blow hammer, or use a BFH and a length of 2x2 pine for an extension to extend the blow. Drums usually require some cave man tactics!